مطلوب تأكيد نهائي من الدعم. بمجرد تقديم طلبك، يرجى انتظار التأكيد النهائي من الشركة. ( 97144476031)
Hioki PW3365 Clamp On Power Logger
0.00 AED
متوفر في المتجر
تفاصيل المنتج
Introduction of Hioki PW3365
The HIOKI PW3365 is a Clamp-On Power Logger designed to measure and record electrical parameters in power systems. It monitors and analyzes power consumption, power quality, and energy efficiency across various applications.
Assessing the current situation is the first step in energy conservation. Identify trends by simultaneously measuring the energy needed to maintain environmental conditions and the energy used for production. This can be accomplished by deploying multiple individual instruments throughout the plant and on various department floors.
HIOKI CLAMP ON POWER LOGGER PW336 KEY Features
- Download the measurement results to a computer via the power logger’s LAN or USB interface or its SD card.
- Simultaneously monitor all data in real-time, control your device, and download the recorded data remotely
with GENNECT One software.
HIOKI PW3365 Specifications
| Feature | Specification |
| Operating Environment | Indoors, Pollution degree 2, altitude up to 2000 m (6562 ft.) |
| Operating Temperature and Humidity | -10°C to 50°C (14°F to 122°F), 80% RH or less (no condensation) |
| Battery Operation Temperature and Humidity | 0°C to 40°C (32°F to 104°F), 80% RH or less |
| Battery Charging Temperature and Humidity | 10°C to 40°C (50°F to 104°F), 80% RH or less |
| Storage Temperature and Humidity | 0°C to 60°C (32°F to 140°F), 80% RH or less (no condensation) |
| Battery Storage Temperature Range | -10°C to 30°C (14°F to 86°F) |
| Maximum Rated Voltage Between Terminals | |
| – Voltage Input Section | 1.7 VAC, 2.4 Vpeak |
| – Current Input Section | 1.7 VAC, 2.4 Vpeak |
| Maximum Rated Voltage to Earth | |
| Voltage Input Section | 600V Measurement Category III, 300V Measurement Category IV |
| Current Input Section | Depends on the clamp sensor in use |
| Dielectric Strength | 7.06 kVrms AC |
| Applicable Standards | Safety: EN61010, EMC: EN61326 |
| Charge Function | Charges the battery whether the instrument is on or off |
| Charge Time | Max. 6 hr. 10 min. (reference value at 23°C) |
| Backup Battery Life | Clock and settings (Lithium battery), Approx. 10 years @23°C (73.4°F) |
| Dimensions | Approx. 180W × 100H × 48D mm (7.09″ × 3.94″ × 1.89″) (without PW9002) |
| Approx. 180W × 100H × 68D mm (7.09″ × 3.94″ × 2.68″) (with PW9002) | |
| Mass | Approx. 540g (19 oz) (without PW9002), Approx. 820g (28.9 oz) (with PW9002) |
حفظ هذا المنتج في وقت لاحق
Hioki PW3365 Clamp On Power Logger
عرض الأسعار في:
AED