final confirmation from support is required. Once your order is placed, please await final confirmation from the company. (+97144476031)
Additel ADT227 with HART Documenting Multifunction Process Calibrator
35,300.00 AED
In stock
Product Details
Introduction of Additel ADT227 with HART Documenting
The Additel ADT227 with HART Documenting Multifunction Process Calibrator is an advanced device that seamlessly integrates the functions of a high-end process calibrator with an efficient data acquisition system. It can scan and record up to 82 channels at a rate of 10 channels per second. The device features an internal rechargeable battery that provides up to 8 hours of continuous use. Additionally, the Additel ADT227 with HART is equipped with a built-in USB port, allowing for easy data transfer.
Additel ADT227 Key Features
- Sourcing, simulating and measuring pressure, temperature and electrical signals
- Built-in barometer
- Large smartphone like touchscreen user experience
- USB type-C and bluetooth communications
- IP67 rated
- High voltage measurement capability (300V AC)
- True RMS voltage meter capability
- High static differential pressure measurement 0.002% FS
Additel ADT227 Specifications
| Specification | Details |
| Operating Temperature | -10°C to 50°C |
| Specification Guaranteed Temp. Range | 10°C to 30°C |
| Storage Temperature | -30°C to 70°C |
| Humidity | <95%, non-condensing |
| Power Supply | 6600mAh, 23.8Wh lithium battery; charging time 4~6 hours; battery pack can be charged independently |
| User Interface | Icon-Driven Menus |
| Ports Protection Voltage | 50V max (only for the top ports) |
| Display | 5.0 inch 480 x 800 mm TFT LCD capacitive screen |
| Data Logger | 500 results, each result x 1,000,000 recordings; each recording can record 7 channels’ values |
| Maximum Altitude | 3000 meters |
| European Compliance | CE Mark |
| Electrical Connection | Ø4mm sockets and flat mini-jack thermocouple socket |
| Size | 6.97″ x 4.13″ x 2.04″ (177 mm x 105 mm x 52 mm) |
| Weight | 1.6 lb (0.7 kg) |
| Battery | Rechargeable Li-ion battery (included); Typically 16 hours of battery life |
| Battery Charge | 110V/220V external power adapter included; battery can be charged externally; Typical charge time 6-8 hours |
| External Pressure Module | Dual channel serial plug; can connect two digital pressure modules |
| Warm-up Time | Full specification performance achieved after 10 minutes |
| ROHS Compliance | ROHS II Directive 2011/65/EU, EN50581:2012 |
| Display Rate | 3 readings per second |
| Barometric Accuracy | 55Pa |
| IP Protection Level | IP67, 1 meter drop test |
| Communication | Isolated USB-TYPEC (slave), Bluetooth BLE |
| Calibration | ISO 17025-accredited calibration with data |
Save this product for later
Additel ADT227 with HART Documenting Multifunction Process Calibrator
Display prices in:
AED