final confirmation from support is required. Once your order is placed, please await final confirmation from the company. (+97144476031)
Fluke 2052 Advanced Wire Tracer Kit
0.00 AED
In stock
Product Details
Fluke 2052 Advanced Wire Tracer Kit
The Fluke 2052 Advanced Wire Detector accurately and safely detects live and de-energized wires in residential, commercial and industrial wiring up to CAT IV 600V. This CAT rating provides the highest level of protection for any wire. It is designed to protect you from the most dangerous electricity, up to 8000V, that can occur in industrial and energy environments. This is especially important in situations where you may encounter environments such as industrial centers, factories and hospitals where critical equipment may not be online.
Fluke 2052 Kit Key Features
- Locate energized and de-energized wires quickly and accurately in walls, ceilings, and floors
- Find breaks or opens and shorts, and identify breakers and fuses easily
- CAT IV 600 V safety rated
- Includes the i400 AC Current Clamp accessory for inducing a tracing signal on the cable when there is no access to bare conductors
Fluke 2052 Advanced Wire Tracer Kit Specifications
| General | 2052R Receiver | 2000T Transmitter | i400 AC Current Clamp |
| Measurement category | CAT IV 600 V | CAT IV 600 V | CAT IV 600 V, CAT III 1000 V |
| Operating voltage | 600 V AC/DC | 600 V AC/DC | 1000 V AC |
| Operating frequency | Energized: 6.25 kHz De-Energized: 32.768 kHz |
Energized/Loop: 6.25 kHz De-Energized: 32.768 kHz |
N/A |
| Signal indications | Numeric, bar graph display and audible beep | LEDs and audible beep | N/A |
| Response time | Tip Sensor (Energized/De-Energized): 500 ms NCV: 500 ms Battery monitoring: 5 s |
Line voltage monitoring: 1 s Battery voltage monitoring: 5 s |
N/A |
| Current output of signal (typical) | N/A | Energized circuit: High mode: 60 mA rms Low mode: 30 mA rms De-energized circuit: High mode: 110 mA rms Low mode: 40 mA rms Loop mode with test leads: 160 mA rms Loop mode with i400 AC Current Clamp: 385 mA rms |
N/A |
| Signal voltage output (nominal) | N/A | Energized circuit: High mode: 14 W @ 230 V ac/50 Hz, 3.33 kΩ @ 230 V ac Low mode: 4.6 W @ 230 V ac/50 Hz, 11.5 kΩ @ 230 V ac De-energized circuit: High mode: 31 V RMS, 140 Vp-p, 0.86 W @ 1 kΩ load Low mode: 27.5 V RMS, 120 Vp-p, 0.1 W @ 1 kΩ load Loop mode with test leads: 32 V RMS, 140 Vp-p, 0.87 W @ 1 kΩ load Loop mode with i400 AC Current Clamp: 31 mV, 0.89 W @ 1 Ω load |
N/A |
| Range detection (open air) | Tip Sensor: Energized Max distance via air: up to 6.1 m (20 ft) Pinpointing: approx. 5 cm (1.97 in) Tip Sensor: De-Energized Max distance via air: up to 4.5 m (14.7 ft) Pinpointing: approx. 5 cm (1.97 in) NCV (40 Hz to 400 Hz) Max. sensitivity: 90 V up to 2 m Min. sensitivity: 600 V up to 1 cm |
N/A | |
| Current range | N/A | N/A | 400 A |
| Basic accuracy | N/A | N/A | 2 % + 0.06 A (45 Hz to 400 Hz) |
| Mechanical | Fluke 2052 | ||
| Power supply | 4 x AA (alkaline) | 8 x AA (alkaline) | N/A |
| Power consumption (typical) | 110 mA | High/low mode: 70 mA Loop mode with Clamp: 90 mA Consumption without signal transmission: 10 mA |
N/A |
| Battery life | Approx. 16 h | High/low mode: approx. 25 h Loop mode: approx. 18 h |
N/A |
| Low battery indication | Yes | Yes | N/A |
| Fuse | N/A | 1.6 A, 700 V, fast-acting, Ø 6 x 32 mm, 50 kA interrupt |
N/A |
| Maximum conductor size | N/A | N/A | 32 mm (1.26 in) |
| Dimensions (L x W x H) | Approx. 183 x 75 x 43 mm (7.2 x 2.95 x 1.69 in) |
Approx. 183 x 93 x 50 mm (7.2 x 3.66 x 1.97 in) |
Approx. 150 x 70 x 30 mm (5.9 x 2.75 x 1.18 in) |
| Weight | Approx. 0.27 kg (0.6 lb) | Approx. 0.57 kg (1.25 lb) | Approx. 0.114 kg (0.25 lb) |
Save this product for later
Fluke 2052 Advanced Wire Tracer Kit
Display prices in:
AED